|
|
|
|
Pilt on illustreeriv
|
Inductive Sensor NCN8-18GM40-N0-V1, M18, NAMUR, NC, Sn 8mm, SF 300Hz, yellow LED, -25..100°C, ss 1.4305, PBT, SIL2, M12 4pin, IP67 Kood:
181114
Tootja
:
|
Saadavus:
Laos
|
Kaal:
0.045 kg/tk
|
|
|
|
|
|
Inductive Sensor NCN8-18GM40-N0-V1, M18, NAMUR, NC, Sn 8mm, SF 300Hz, yellow LED, -25..100°C, ss 1.4305 ?PBT, SIL2, M12 4pin, IP67, Pepperl+FuchsInductive sensor NCN8-18GM40-N0-V1
- 8 mm non-flush
- Stainless steel housing
- Usable up to SIL 2 acc. to IEC 61508
Datasheet excerpt: Technical data of NCN8-18GM40-N0-V1
| General specifications |
| Switching function | Normally closed (NC) |
| Output type | NAMUR |
| Rated operating distance | 8 mm |
| Installation | non-flush |
| Assured operating distance | 0 ... 6.48 mm |
| Actual operating distance | 7.2 ... 8.8 mm typ. 8 mm |
| Reduction factor rAl | 0.42 |
| Reduction factor rCu | 0.4 |
| Reduction factor r304 | 0.72 |
| Output type | 2-wire |
| Nominal ratings |
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) |
| Switching frequency | 0 ... 300 Hz |
| Hysteresis | 1 ... 15 typ. 5 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | yes |
| Current consumption | |
| Measuring plate not detected | min. 3 mA |
| Measuring plate detected | ≤ 1 mA |
| Switching state indicator | Multihole-LED, yellow |
| Functional safety related parameters |
| MTTFd | 1914 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Compliance with standards and directives |
| Standard conformity | |
| NAMUR | EN 60947-5-6:2000
IEC 60947-5-6:1999 |
| Electromagnetic compatibility | NE 21:2007 |
| Approvals and certificates |
| FM approval | |
| Control drawing | 116-0165 |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) |
| Storage temperature | -40 ... 100 °C (-40 ... 212 °F) |
| Mechanical specifications |
| Connection type | Connector M12 x 1 , 4-pin |
| Core cross-section | - |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Sensing face | PBT |
| Housing diameter | 18 mm |
| Degree of protection | IP67 |
| General information |
| Use in the hazardous area | see instruction manuals |
| Category | 1G; 2G; 1D |
|
|
|
|
|
