|
|
|
Pilt on illustreeriv
|
LED toiteplokk APV, input 90..264VAC| 127..370VDC, 25.2W 2.1A 12VDC, -30..70°C, cl.2, IP42, Mean Well Kood:
APV-25-12
Hind
Tootja
:
|
Saadavus:
Laos
|
Kaal:
0.1444 kg/tk
|
Maht:
0.0001 m3/tk
|
Hulgipakendi kogus:
72tk
|
|
|
|
LED Power Supply APV-25 25W 1.68A 90-264VAC/12VDC
Features
Constant voltage design
Universal AC input / Full range
Withstand 300VAC Surge input for 5 seconds
Protections: Short circuit / Over load / Over voltage
Fully isolated plastic case
Cooling by free air convection
Small and compact size
IP30 design
Pass LPS
100% full load burn-in test
Low cost, high reliability
Suitable for LED lighting and moving sign applications
2 years warranty
|
OUTPUT
DC Voltage |
12V |
| Rated current |
2.1A |
| Current range |
0 ~2.1A |
| Rated power |
25.2W |
| Ripple & Noise (max.) Note.2 |
150mVp-p |
| Voltage tolerance Note.3 |
±5.0% |
| Line regulation |
±1.0% |
| Load regulation |
±2.0% |
| Setup, rise time Note.6 |
1500ms, 30ms/ 230VAC
1500ms, 30ms/115VAC at full load |
| Hold up time (typ.) |
20ms/230VAC 12ms/115VAC at full load |
| |
|
INPUT
Voltage range Note.4 |
90 ~ 264VAC 127 ~370VDC |
| Frequency range |
47 ~ 63 Hz |
| Effiency (typ.) |
82% |
| AC current |
0.3A/230VAC 0.5A/115VAC |
| Inrush current (max.) |
Cold start 50A (width=185µs measured at 50% lpeak) at 230VAC |
| Leakage current |
0.25mA/240VAC |
| |
|
PROTECTION
Over load |
Above 105%
Protection type: Hiccup mode, recovers automatically after fault conditions is removed |
| Over voltage |
13.8 ~ 16.2V
Protection type: Shut off o/p voltage, clamping by zener diode |
| |
|
ENVIRONMENT
Working temperature |
-30° ~ +70°C (Refer to "Derating Curve") |
| Working humidity |
20 ~ 90% RH non-condensing |
| Storage temp., humidity |
-40 ~ +80°C, 10 ~ 90% RH |
| Temp. coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10 min./1 cycle, period for 60min. each along X, Y, Z axes |
SAFETY & EMC
Safety standards |
UL8750, CSA C22.2 No.250.0-08 approved, Design refer to TUV EN60950-1 |
| Withstand voltage |
I/P-O/P: 3.75KVAC |
| Isolation resistance |
I/P-O/P: &100M Ohms / 500VDC / 25°C / 70% RH |
| EMC emission |
Compliance to EN55015, EN61000-3-2 Class A, EN61000-3-3 |
| EMC immunity |
Compliance to EN61547, EN61000-4-2, 3, 4, 5, 6, 8, 11; light industry level (surge 2KV), criteria A |
OTHERS
MTBF |
1145.7K hrs min. MIL-HDBK-217F (25°C) |
| Dimension |
77 x 40 x 29 (L x W x H) |
| Packing |
0.1kg; 120pcs / 14kg / 0.93CUFT |
NOTE |
- All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
- Ripple & noise are measured at 20MHz of bandwidth by using a 12“ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
- Tolerance: includes set up tolerance, line regulation and load regulation.
- Derating may be needed under low input voltage. Please check the static characteristics for more details.
- The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation,
the final equipment manufacturers must re-quality EMC Directive on the complete installation again.
- Lenght of the set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
- The unit might not be suitable for lighting applications in EU countries. please check with your local authorities for the possible use of the unit.
|
|
File description
|
File type
|
Download link
|
|
|
|
|
|
Product data sheet
|
PDF
|
Download link
|
|
|
|
|
Seotud tooted
|
|
|
|
|
|
LED toiteplokk APV, input 90..264VAC| 127..370VDC, 12W 1A 12VDC, -30..70°C, cl.2, IP42, Mean Well
|
LED toiteplokk APV, input 90..264VAC| 127..370VDC, 15W 1.25A 12VDC, -30..70°C, cl.2, IP42, Mean Well
|
LED toiteplokk APV, input 90..264VAC| 127..370VDC, 36W 3A 12VDC, -30..70°C, cl.2, IP42, Mean Well
|
|
|
€ 10,10 /tk
|
€ 12,00 /tk
|
€ 17,80 /tk
|
|
|
